Ferroscanning Metal Ultrasonic Flaw Test Defects Detector

UFJY-90 ultrasonic flaw detector can be fast and convenient, no damage, accurate detection, location, assessment and diagnosis of variety defects flaw of materials and workpieces (cracks, inclusions, stomata, etc.)
Widely used in steel structure, boiler and pressure vessel, construction, power, petrochemical, pressure piping, metallurgy, aerospace, railway transportation, automobile, machinery, universities and other fields.

Detection function

1. DAC: curve automatically generated and can be sub-production, sampling points are not restricted, and can be amended and compensation to meet any standard; With the gain to change free float
2. Half Span: Clearly distinguish the number of echoes
3. Crack height measurement: accurately measure the height of the crack itself
4. Curve envelope and crest memory: real-time retrieval and record the highest defective wave
5. Surface correction: surface workpiece detection, correction curvature conversion
6. Automatic calibration: automatic test "probe zero", "K value", "frontier" and "material speed";
7.  automatically display the defect echo position (depth d, horizontal p, distance s, amplitude, equivalent dB, aperture φ);
8. free to switch three rulers (depth d, horizontal p, distance s)
9. Automatic gain: automatically adjust the waveform to 80%

Technical Parameters

1. Scanning range: Zero interface incident ~ 10000mm steel longitudinal wave
2. Working frequency: 0.2MHz ~ 20MHz
3. Vertical linearity error: ≤ 3%
4. Horizontal linearity error: ≤ 0.1%
5. Sensitivity margin: > 62dB (deep 200mmΦ2 flat bottom hole)
6. Resolution:> 42dB (5N14)
7. Dynamic Range: ≥32dB
8. Noise level:<8%
9. Hard sampling frequency:150MHz (hard sampling frequency)
10. Repeat the transmission frequency: 100-1000HZ
11. Sound speed range: 100 to 20000 (m / s)
12. Way of working:Single crystal inspection, double crystal detection, penetrating detection
13. Digital suppression: (0-80)%, does not affect the linearity and gain
14. Operating hours: Continuous work for more than 7 hours (lithium battery)
15. Ambient temperature:(-20 to 70) ° C (reference value)
16. Relative humidity: (20 to 95)% RH
17. Dimensions: 210×150×45 (m

 

IV. Company Product
1. Drying, weighing and Grading Equipment and tools.
2. Soil, Rock Testing Equipment.
3. Aggregate Testing Equipment.
4. Concrete Testing equipment.
5. Cement and Mortar Testing Equipment.
6. Asphalt Bitumen Testing Equipment.
7. Steel Testing Equipment.
8. Survey Instrument and Detector.
9. General Lab Equipment and Tools.
10. Scientific Lab Equipment and Tools.




V. Our services
1. Production:
Our factory choose high quality material include steel, stainless steel, circuit board, motor, etc. By strict and efficient production and inspection, products are in high quality and possible low cost.

2. Shipment:
We use 9mm and 15mm thick plywood as packing, heavy machine will be packed in high strength to keep it intact during shipment. We ship goods out from company in shortest time and book fast ship to make sure customer can get goods quickly.

3. After sales:
After shipment, we will delivery shipping documents to customer correctly and quickly. Supply one year warranty for all machines, after one year, we will still supply quick and effective after sales solution.

VI. Contact us:
Hangzhou Civit Instrument Equipment Co.,Ltd.
Website: www.civittest.com
Tel: 0086-571-28202862
Fax: 0086-571-87272769
 

UFJY-90 ultrasonic flaw detector can be fast and convenient, no damage, accurate detection, location, assessment and diagnosis of variety defects flaw of materials and workpieces (cracks, inclusions, stomata, etc.)
Widely used in steel structure, boiler and pressure vessel, construction, power, petrochemical, pressure piping, metallurgy, aerospace, railway transportation, automobile, machinery, universities and other fields.

Detection function

1. DAC: curve automatically generated and can be sub-production, sampling points are not restricted, and can be amended and compensation to meet any standard; With the gain to change free float
2. Half Span: Clearly distinguish the number of echoes
3. Crack height measurement: accurately measure the height of the crack itself
4. Curve envelope and crest memory: real-time retrieval and record the highest defective wave
5. Surface correction: surface workpiece detection, correction curvature conversion
6. Automatic calibration: automatic test "probe zero", "K value", "frontier" and "material speed";
7.  automatically display the defect echo position (depth d, horizontal p, distance s, amplitude, equivalent dB, aperture φ);
8. free to switch three rulers (depth d, horizontal p, distance s)
9. Automatic gain: automatically adjust the waveform to 80%

Technical Parameters

1. Scanning range: Zero interface incident ~ 10000mm steel longitudinal wave
2. Working frequency: 0.2MHz ~ 20MHz
3. Vertical linearity error: ≤ 3%
4. Horizontal linearity error: ≤ 0.1%
5. Sensitivity margin: > 62dB (deep 200mmΦ2 flat bottom hole)
6. Resolution:> 42dB (5N14)
7. Dynamic Range: ≥32dB
8. Noise level:<8%
9. Hard sampling frequency:150MHz (hard sampling frequency)
10. Repeat the transmission frequency: 100-1000HZ
11. Sound speed range: 100 to 20000 (m / s)
12. Way of working:Single crystal inspection, double crystal detection, penetrating detection
13. Digital suppression: (0-80)%, does not affect the linearity and gain
14. Operating hours: Continuous work for more than 7 hours (lithium battery)
15. Ambient temperature:(-20 to 70) ° C (reference value)
16. Relative humidity: (20 to 95)% RH
17. Dimensions: 210×150×45 (m

 

IV. Company Product
1. Drying, weighing and Grading Equipment and tools.
2. Soil, Rock Testing Equipment.
3. Aggregate Testing Equipment.
4. Concrete Testing equipment.
5. Cement and Mortar Testing Equipment.
6. Asphalt Bitumen Testing Equipment.
7. Steel Testing Equipment.
8. Survey Instrument and Detector.
9. General Lab Equipment and Tools.
10. Scientific Lab Equipment and Tools.




V. Our services
1. Production:
Our factory choose high quality material include steel, stainless steel, circuit board, motor, etc. By strict and efficient production and inspection, products are in high quality and possible low cost.

2. Shipment:
We use 9mm and 15mm thick plywood as packing, heavy machine will be packed in high strength to keep it intact during shipment. We ship goods out from company in shortest time and book fast ship to make sure customer can get goods quickly.

3. After sales:
After shipment, we will delivery shipping documents to customer correctly and quickly. Supply one year warranty for all machines, after one year, we will still supply quick and effective after sales solution.

VI. Contact us:
Hangzhou Civit Instrument Equipment Co.,Ltd.
Website: www.civittest.com
Tel: 0086-571-28202862
Fax: 0086-571-87272769