Motorcycle Scooter Tyre 3.50-10 3.50X10

there will be about 35% carbon black residual from tyre pyrolysis machines

it could be sold directly or refined into better quality ones.

say N330 or N660

it could be widely used for additives

say rubbers for playground,  for car tyres, or shoes etc.

usually there are models with capacities from 1-20tons per hour 

Working Principle

The grinding Process of the Main Mill is that the transmission device brings along the Central Shaft to drive. The upper part of the shaft connects with the Quincunx Rack, on the frame is loaded with the roller assembly, and forms a swinging pivot. The central shaft does revolve around the central rotation, at the same time it revolves around the grinding rings, and it self also rotates on account of the grinding effect. The shovel system, in the lower part of rollers, is loaded on the lower part of the Quincunx Rack. In the process of rotating of the shovel and the roller, the material will be fed gasket layer between the rollers and ring. The outside centrifugal force (compression force) yielding in this process will process the material into small powder, thus the desired powder is obtained.