The TW Type Welding Torch has several types ,the 180A ,200A ,300A ,400A ,500A ,you can choice them according to the rating ,the duty cycle and the wire size you use .
By the way ,the TW series welding torches has improved by our company and techicial .
1. Novel design of main body inside of handle is convenient to install and transform different angles.
2. The new design with Japan Omron switch reduces failure rate to 1/10000.
3. Spring cable support solves long-term use of rubber aging problem
4. Consumables are interchangeable with the original welding gun.
5. Ergonomic new handle makes operator to be relaxed and reduce fatigue strength.
TW Type Welding Torch TW-200 Mig Torch,TW-300 Welding Torch,TW-400 Welding Torch,TWC 400A Air Cooled Welding Torch EDAWELD COMPANY LIMITED , http://www.jsedaweld.com
Screw barrel and element for extrusion machine
SPECIFICATONS
1. Extruder replace parts
2. High quality, high accuracy
3. Screw: W6Mo5Cr4V2.38CrMoAl. SKD11. SACM645 etc
4. OEM accepted according to your drawing
Our machine types for:
1. Co-Rotating Parallel Twin Screw Pelletizing Extruders
2. Single Screw Pelletizing Extruders
3. Die Face Cut (Air Cooling) Pelletizing Extruders
4. Double Stage / Double Degassing Recycling Extruders
5. Crushers, Mixers, Storage Tanks, Vibrators, Granulators, Blowers
6. Extruder spare parts 
Extrusion Screws enable you to manimize extrusion throughput, product quality and component life.
It delivers higher throughput at lower melt temperature than earlier barrier barrier designs and has proves its benefit in processing polyolefins.
PET,and PLA in various extrusion and blow molding processes.
Parameter
Mode
Screw Diameter
D(mm)Screw Length(mm)
L/D
Screw Rater
N(r/min)Motor Power
P(kw)Torque
T(N.m)Torque
Lvel
T/N3Capacity
Q(kg/h)Weight(kg)
Dimension
(m)
SHJ-20
22
150
32-44
600
5.5
43
7.5
0.5-10
1000
1.7*0.5*1.8
TSE-30A
31
Â
32-48
500
11
105
5.9
5-30
1500
2.4*0.63*2
TSE-30B
Â
600
15
119
6.7
5-40
SHJ-35A
35.6
Â
32-48
600
15
119
4.4
20-60
Â
Â
TSE-40A
41
160
32-64
400
22
263
6.4
65-110
3000
2.9*0.65*2
TSE-40B
41
160
32-52
600
30
239
5.8
90-150
SHJ-50A
50.5
Â
32-52
500
45
430
5.4
135-225
Â
Â
TSE-52B
51.5
210
32-64
600
55
438
5.5
225-250
3000
3.8*2*0.69
TSE-52C
51.5
210
32-64
600
75
597
7.5
200-300
SHJ-65A
62.4
240
32-52
400
75
895
6.3
180-250
4000
4.2*0.67*2.2
500
75
716
5.1
180-250
4000
4.2*0.67*2.2
TSE-65B
62.4
240
32-64
600
90
716
5.1
200-300
4000
4.2*0.67*2.2
SHJ-75A
71
290
32-56
400
90
1074
5.0
225-350
4000
4.8*0.78*2.3
500
110
1050
4.8
250-450
TSE-75B
71
290
32-64
600
132
1050
4.8
350-550
TSE-75D
71
290
32-64
60O
220-250
1990
9.2
500-1000
TSE-95A
93
360
32-64
500
250
2387
5.0
600-1000
4000
6.2*0.87*2.4
TSE-95B
93
360
32-64
600
315
2506
5.3
800-1200
TSE-135A
133
Â
32-64
500
750
7162
5.38
1500-2250
4000
Â
Barrel sections are available as:
Closed barrel section
Barrel section with opening for material feed or for devolatilization
The processing section is provided with stainless steel plates as a protection against
Accidental contact.
Screw Elements: High-speed steel W6Mo5Cr4V2, nitrogen treatment.
Screw Shaft: High performance alloy steels, 40CrNiMoA; With standing high load, Etc
Description
The inter meshing screws co-rotate and wipe each other with narrow clearance so that
No residues are left in the screw flight and clean effort is thus reduce.
Screw elements with various pitches and lengths
Kneading blocks with various angles ofstagger, numbers ofkneading disks and disk
Widths.
Screw tips to fix the screw set axially
Gear teeth connection to ensure power flow between the screw shaft and screw
Elements.
PackagingÂ
Pacakge: Wooden case or Using Anti-rust oil processing, then use stretch film cover extruder against moisture damage.
Â
Screw barrel and element for extrusion machine
SPECIFICATONS
1. Extruder replace parts
2. High quality, high accuracy
3. Screw: W6Mo5Cr4V2.38CrMoAl. SKD11. SACM645 etc
4. OEM accepted according to your drawing
Our machine types for:
1. Co-Rotating Parallel Twin Screw Pelletizing Extruders
2. Single Screw Pelletizing Extruders
3. Die Face Cut (Air Cooling) Pelletizing Extruders
4. Double Stage / Double Degassing Recycling Extruders
5. Crushers, Mixers, Storage Tanks, Vibrators, Granulators, Blowers
6. Extruder spare parts
Extrusion Screws enable you to manimize extrusion throughput, product quality and component life.
It delivers higher throughput at lower melt temperature than earlier barrier barrier designs and has proves its benefit in processing polyolefins.
PET,and PLA in various extrusion and blow molding processes.
Parameter
Mode
Screw Diameter
D(mm)Screw Length(mm)
L/D
Screw Rater
N(r/min)Motor Power
P(kw)Torque
T(N.m)Torque
Lvel
T/N3Capacity
Q(kg/h)Weight(kg)
Dimension
(m)
SHJ-20
22
150
32-44
600
5.5
43
7.5
0.5-10
1000
1.7*0.5*1.8
TSE-30A
31
Â
32-48
500
11
105
5.9
5-30
1500
2.4*0.63*2
TSE-30B
Â
600
15
119
6.7
5-40
SHJ-35A
35.6
Â
32-48
600
15
119
4.4
20-60
Â
Â
TSE-40A
41
160
32-64
400
22
263
6.4
65-110
3000
2.9*0.65*2
TSE-40B
41
160
32-52
600
30
239
5.8
90-150
SHJ-50A
50.5
Â
32-52
500
45
430
5.4
135-225
Â
Â
TSE-52B
51.5
210
32-64
600
55
438
5.5
225-250
3000
3.8*2*0.69
TSE-52C
51.5
210
32-64
600
75
597
7.5
200-300
SHJ-65A
62.4
240
32-52
400
75
895
6.3
180-250
4000
4.2*0.67*2.2
500
75
716
5.1
180-250
4000
4.2*0.67*2.2
TSE-65B
62.4
240
32-64
600
90
716
5.1
200-300
4000
4.2*0.67*2.2
SHJ-75A
71
290
32-56
400
90
1074
5.0
225-350
4000
4.8*0.78*2.3
500
110
1050
4.8
250-450
TSE-75B
71
290
32-64
600
132
1050
4.8
350-550
TSE-75D
71
290
32-64
60O
220-250
1990
9.2
500-1000
TSE-95A
93
360
32-64
500
250
2387
5.0
600-1000
4000
6.2*0.87*2.4
TSE-95B
93
360
32-64
600
315
2506
5.3
800-1200
TSE-135A
133
Â
32-64
500
750
7162
5.38
1500-2250
4000
Â
Barrel sections are available as:
Closed barrel section
Barrel section with opening for material feed or for devolatilization
The processing section is provided with stainless steel plates as a protection against
Accidental contact.
Screw Elements: High-speed steel W6Mo5Cr4V2, nitrogen treatment.
Screw Shaft: High performance alloy steels, 40CrNiMoA; With standing high load, Etc
Description
The inter meshing screws co-rotate and wipe each other with narrow clearance so that
No residues are left in the screw flight and clean effort is thus reduce.
Screw elements with various pitches and lengths
Kneading blocks with various angles ofstagger, numbers ofkneading disks and disk
Widths.
Screw tips to fix the screw set axially
Gear teeth connection to ensure power flow between the screw shaft and screw
Elements.
PackagingÂ
Pacakge: Wooden case or Using Anti-rust oil processing, then use stretch film cover extruder against moisture damage.
Â
Model NO.: TSE series
Size: Customer Choice
Trademark: tse-kairong
Transport Package: Wooden Case
Specification: CE ISO
Origin: Nanjing
HS Code: 87265100
Model NO.: TSE series
Size: Customer Choice
Trademark: tse-kairong
Transport Package: Wooden Case
Specification: CE ISO
Origin: Nanjing
HS Code: 87265100