Manual Control of CNC Lathes

CNC lathes can perform feed movement, spindle rotation, tool indexing, coolant switch, and chip remover start and stop through manual operation of the control panel.

First, feed movement operation

Feed motion can be divided into continuous feed and jog feed. The difference between the two is that in the manual mode, pressing the coordinate feed key, the feed part moves continuously until the coordinate feed key is released; in the jog state, each time the coordinate feed key is pressed, the feed part Only move a preset distance.

Feed operations include continuous, jog mode selection, feed setting, feed direction control, etc.

Second, spindle and cooling operation

In the manual mode, you can set the spindle speed, start the spindle positive, reverse and stop, coolant on and off.

Third, manual tool change

For CNC lathes with automatic tool changer, the tool rest can be automatically indexed by program instructions, and the tool rest can be manually controlled via the panel.

Fourth, chip control

Press the appropriate button to control the forward, reverse and stop of the chip conveyor. It is used for chip evacuation. When iron chips jam the chip remover, it can be turned off.

Material:lead free brass, DZR, CW617N, CW614N, C37700, Common Brass.
Size: 15x1/2"-54x2''
Working pressure: 16Bar - 20 Bar.
It meet NSF/ANSI 61, NSF/ANSI 14 and ASSE 1061 standard for use in potable water and hydronic heating water distribution

  • Instant Push-Fit connection for increased ease-of-use.
  • Fittings certified to 200 PSI and 200°F (93°C).
  • no loose components, ensures secure, reliable connection
  • LEAD FREE brass body. Foundation of a strong, corrosion resistant, durable fitting.
  • Approved to be used underground and behind walls without access panels.
  • Designed for hydronic heating as well as potable water distribution.

Brass Push-fit Fitting

Brass Push-fit fitting, Brass Lead Free Push Fit Fitting,NSF Brass Lead Free Push Fit Fitting,Lead Free Brass Push Fit Fitting,Brass Low Lead Push Fit Fitting,Brass Low Lead Push Fit Coupling,NSF Approved Lead Free Push Fit Fitting