Construction Hoist Steel Structure
Construction Hoist Steel Structure means the construction hoist spare parts like Construction Hoist Mast Section, Passenger Hoist Cage, Construction Hoist Wall Tie and so on.
The length of each mast section is 1508mm, the rack is fixed on the mast by three bolts and it can be exchanged. For the single cage hoist there is only one rack on the mast section, and the mast section can be used for the double cages hoist by increasing one rack. The section of the mast is diverse, select one type section according to different hoist. The mast sections are bolted together with M24 bolts and nuts to form mast. The mast is tied to the building with tie-in and is the guide rail of the cage. According to the user`s or circumstance`s request, surface of mast is hot dip galvanized, which can prevent it rusting.
The tie-in(wall tie) is the linked part between mast and building, to keep the stabilization of the mast. Distance between the tie-in is about 6~9m alone the mast. There are several types of tie-in. Select one of them according to need, tie-in can adjust the vertical of mast in definite ranges. According to the user`s or circumstance`s request, surface of the tie-in is hot dip galvanized, which can prevent it rusting.
The cage dimension(L×W×H)(m): 3×1.5×2.5. We can also manufacture cages of other size according to the user`s needs. The material of the cage and the door material can be steel wire weave, aluminum-plastic panel, punched-plate, figured aluminum board or other type according to user`s needs. The gate is equipped with drawing gate,include small turn over gate.
Construction Hoist Mast Section,Building Hoist Mast Section,Passenger Hoist Cage,Construction Hoist Wall Tie, Construction Hoist Anchorage Frame SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytopkittowercrane.com
I. Installation and location of moisture analyzer:
1, Moisture analyzer may not be installed in a room with corrosive gases, corrosion of the moisture analyzer circuit part, shorten the life of the instrument.
2, where the room temperature is lower than 5 degrees or higher than 40 degrees.
3, can not be installed in places with high sunlight and humidity.
4, can not be installed in places where power is not stable, it is recommended to use electronic regulator.
Second, the electrode maintenance:
1, When the measuring electrode is contaminated, it can be wiped with acetone or absolute ethanol. If it still cannot be decontaminated, use an alcohol lamp to burn the platinum ball end.
2. When the electrolytic electrode is contaminated, acetone or absolute ethanol can be injected into the cathode chamber and shaken repeatedly to remove the internal dirt.
Moisture Analyzer Maintenance and Maintenance Measures (Apply to Coulomb Trace Moisture Analyzer):