What problems should be paid attention to when loading and unloading a wood transporter

Wood transporters are tasked with transporting timber from the production site to the market. Large-scale trailers are generally used. In the past, manual loading and unloading was used. With the continuous upgrading of wood transport vehicle technologies, there are now automatic loading and unloading of timber transport vehicles. This kind of car and our applicable engineering autoloader have certain differences. When using it, there are the following problems that require everyone's attention.

First, the use of automatic loading and unloading of wood transport vehicles should pay attention to controlling the lifting angle of vehicles when loading and unloading. In the loading and unloading of wood, it is necessary to lift the body up to a certain angle. The control of this angle is very important. Generally within 45 degrees, or too large, the slope of the body is steep, so that it is easy to make the wood fall down and cause danger. If the angle is too small, the effect of automatic loading and unloading will not be achieved. During the operation, the body should be lifted in stages to find the best angle. In the loading and unloading of wood, the surrounding environment should be observed first, the site should be empty, there should be no people around, and it should be determined that there is no danger.

Second, pay attention to the control of the vehicle's power system when using it. The use of automatic loading and unloading of wood transport vehicles through the control of the vehicle's power system to achieve the vehicle's function, in the process of operation to grasp the degree of good, if excessive force is likely to cause overturning or wood pour down, if the force is insufficient can not be enough The effect of automatic uninstallation. Moreover, the power cannot be continuously increased in the course of operation, otherwise it is not conducive to the control of the vehicle, and it is also prone to dangerous situations.

Third, the use of automatic loading and unloading of wood transporters should also pay attention to the consistency of operation. The operation of loading and unloading wood must have a certain degree of consistency, especially when unloading, it must be consistent in action. Otherwise, the unloading work cannot be completed smoothly. Coherent operation helps to increase the efficiency of the unloading and also reduces the danger. During the unloading, it is necessary to make full use of the rearview mirror of the vehicle and the related equipment to be well coordinated so that the loading and unloading of the wood can be completed.