Ankai bus maintenance tips comfortable and safe driving

In July, the sun was fierce and the high-temperature season had not seen a trend of cooling for a month. The punctures and auto-ignition incidents in various cities also gradually increased. Ankai bus has mastered dozens of people's life safety during the entire driving process. In such hot weather, what maintenance should be done to the Ankai bus to reduce the chance of vehicle breakdown?

安凯客车


1, control tire pressure, temperature


The number of puncture accidents in traffic accidents in recent years has also gradually increased. According to relevant statistics from the transportation department, among the accidents that occurred on highways, puncture accidents accounted for more than 60 percent of the accidents. And whenever there is a hot season, it is also a time when a puncture accident occurs and there are many accidents. Ankai bus driving time should be too long, the middle can choose to rest at the service station for a while, need to prevent the tire temperature and pressure is too high. When carrying out daily inspections of passenger cars, it should always be noted whether there is any damage on the surface of the tires, whether there are gravel stones in the tread pattern, etc. In addition, the pressure check of the tires is also required.

安凯客车

If the Ankai bus is in the process of driving, the passenger car's tire suddenly has a fault. Please do not take the brake first. The correct method is to slowly slow down the vehicle first. Because when the Ankai passenger car is driving at a high speed, the sudden occurrence of a puncture can cause the vehicle to become sideways. At this time, the sudden braking will make the situation of side-bias more serious, and eventually it will cause a rollover. Accident.


2. Air conditioning maintenance in summer needs to be advanced


In such hot weather, many friends have said that their own lives are air-conditioned. Of course, if the Ankai bus rides on without air-conditioning, does the car sweat into the river? Air-conditioning is now indispensable in our lives. It has also become the main symbol of vehicle humanity and comfort.

Ankai air conditioning maintenance should be carried out before the summer, the need for air conditioning fan, filter, refrigerant, and compressor oil level check is sufficient, to pave the way for the start of the summer. Of course, in the process of vehicle use in the summer, we must always do a good job of daily maintenance, such as the need to check the oil level of the compressor and the color, the degree of tightness of the belt, and the relevant electrical components of the electrical wiring terminal posts, etc. Eliminating security risks. Ankai passenger car air conditioning if it is not running, mostly because of the electrical line has failed.

安凯客车


3、Use special summer oil


The importance of engines for Ankai buses should be understood by everyone. The oil used in the engine of the Ankai passenger car in summer should be the summer special engine oil. Under normal circumstances, the oil used in the summer is in the range of minus 15 degrees Celsius to 55 degrees Celsius. If used in the summer is the winter oil is to reduce the pressure of the oil, resulting in increased wear and tear parts. In addition to the use of oil, it is also necessary to maintain the water temperature at a suitable temperature. It is not allowed to remove the thermostat without permission, and the scale in the tank is regularly cleaned to keep the inside of the water tank clean. For the surface of the heat exchanger, it is also necessary to do a good job of cleansing. By the way, carefully check the operating conditions between the various parts, adjust the tightness of the belt, check the sealing pressure of the water system, and replace the aged hoses. new.


It`s suitable for parts plane grinding in batches. Application of Double Side Grinding in hydraulic pneumatic components, hydraulic motor parts, car steering pump parts, refrigeration compressor parts, oil pump and oil mouth parts, engine parts, high precision bearings, seals, piston rings, measuring tools, mold, instrument, carbide blade, ceramics, monocrystalline silicon piece, magnetic materials and other products.

Double-Sided Grinding Machine

Grinder Machine,Double-Sided Grinding Machine,Double Side Grinding,Double Face Grinding

Xinxiang Sunrise CNC Bearing Equipment Co., Ltd. , https://www.cncsunrise.com