BIFMA X5.1 Office Chairs Base / Caster Durability Test Equipment

Bifma X5.1 Office Chairs Base / Caster Durability test equipment
 Introduction of product:
Bifma X5.1 Office Chairs Base / Caster Durability test equipment is suitable for testing the base seat chair with caster, to determine the ability of caster or base resistance to fatigue and abrasion caused by moving forward or backward. Place the caster specimens on the tester platform, and loading 102kg to make the specimen in repeat travel at a certain speed, the travel distance should be at least 762mm...After certain times, check the caster function is normal. This machine is required to place on a horizontal and stable platform when install. Slip type life tester needs to connect with 7kgf/cm^2 or above clean gas supply.


Technical parameters of Bifma X5.1 Office Chairs Base / Caster Durability test equipment:
Test bed size 85x160cm
Test speed 10± 2/min
Test stroke ≥ 762mm
Load 102kg± 1g
Blocks thickness 3.2mm, width 51mm, edge blend 3 pcs
Test times barrier: 2000 times; Barrier free: 98000 times
Counting 0~999 999 adjustable
Control mode PLC+TEXT screen control
Size(WxDxH) Test machine: 270x85x129cm; Control box: 36x32x100cm
Weight(Kg) ≈500Kg
Air supply 7kgf/cm^2 and above stable gas source
Power 1 AC 220V 3A

Y series 3-phase cast iron housing induction motor

Y series motor is totally enclosed and fan cooled three phase squirrel cage induction motor. It is newly designed in conformity with the relevant rules of IEC&DIN42673 standards. The Y connection for motor of 3kw and below. And delta connection for 4kw and above.

Application:

Y series motors are widely used in places where there doesn't exist combustible, explosive or corrosive gas, and without any special requirements, such as machine tools, pumps, fans, transport machinery, mixer, agriculture machinery and food machines, etc.