Laser cleaning equipment is a new generation of surface cleaning high-tech products. It is very easy to install, manipulate and achieve automate. Easy operation, you only turn on the power and open the device, machine will be cleaned with no chemical reagents, no media, no dust and no water. With the advantage of manual adjustment of the focus, fit curved surface cleaning, good surface cleanliness and so on . Laser Cleaning Machine can clean the resin of subject surface, oil stains, stains, dirt, rust, coating, coating, paint.
Advantage of Laser cleaning
1. Compact construction,Gentle and Precise cleaning
2. Ultra-high stability
3. Lower the cost of operation
4. Maintenance free
5. No damage to substrates
6. Green process
7. Highly reliable
8. Portable and precise
With those advantage. It can be applied on Oxides/rust removal from metallic surface;Cleaning rubber molds; Pre-treatment for coating; Removal of oil and grease,etc.; Paint removal and De-coating; Pre-treatment for brazing and welding; Restoration and conservation etc.
Laser Cleaning Machine Laser Cleaning Machine,Handheld Laser Cleaner,Welding Cleaning Machine,Fiber Laser Cleaning Shandong Meiman Laser Technology Co., Ltd. , https://www.meimanlasers.com
Our blades was made from high quality steel,which was produced by China famous steel factory which means our blades will have al longer time.We do a lot of experiment to create an alloy formula which can improve the performance of rotary blades.And with individual deposition techniques our product have obvious advantages on the quality of agricultural blades.
Material
 C(%)
Si(%)
Mn(%)
Cr(%)
P(%)
S(%)
65Mn
0.62-0.70
0.17-0.37
0.9-1.20
<=0.25
<=0.015
<=0.035
60Si2Mn
0.56-0.64
1.50-2.00
0.69-0.90
<=0.35
<=0.035
<=0.035
70Mn
0.67-0.75
0.17-0.37
0.90-1.20
<=0.25
<=0.035
<=0.035
60Mn
0.57-0.65
0.17-0.37
0.7-1.00
<=0.25
<=0.035
<=0.03
Material
 C(%)
Si(%)
Mn(%)
Cr(%)
P(%)
S(%)
65Mn
0.62-0.70
0.17-0.37
0.9-1.20
<=0.25
<=0.015
<=0.035
60Si2Mn
0.56-0.64
1.50-2.00
0.69-0.90
<=0.35
<=0.035
<=0.035
70Mn
0.67-0.75
0.17-0.37
0.90-1.20
<=0.25
<=0.035
<=0.035
60Mn
0.57-0.65
0.17-0.37
0.7-1.00
<=0.25
<=0.035
<=0.03
Model NO.: RALC
Model NO.: RALC
Our blades was made from high quality steel,which was produced by China famous steel factory which means our blades will have al longer time.We do a lot of experiment to create an alloy formula which can improve the performance of rotary blades.And with individual deposition techniques our product have obvious advantages on the quality of agricultural blades.