How to do if the suction pump vacuum pump outlet too much oil

People who often use the suction truck vacuum pump for work and work will find that in many cases, the suction pump vacuum pump is likely to inject a large amount of oil at the outlet. As a result, not only has there been a negative impact on construction and operations, but also a great deal of waste of resources. Therefore, immediately after allowing experts to analyze, if there is a lot of fuel injection at the outlet end of the suction truck vacuum pump, how to deal with it is the best.

吸粪车真空泵出口喷油过多怎么办_副本1.jpg

First, the first step, do not panic, first of all need to see is not too much oil into the inlet, and need to see the temperature is not too high. Because if the temperature is high, then in this case, because of thermal expansion and contraction, let the body splash around. Therefore, at this time, the first need to do cooling treatment, then depending on the size of the oil, the first thing is to look at the location of the entire oil is not below the horizontal line. If it is above the horizontal line, then this is because of too much fuel. Therefore, in the next case, it must be noted that refueling should be adequate and not too much. Because if there is too much fuel, then you need to suck out the oil through siphoning. So this is very complicated, and in the process of sucking oil, it is also prone to blockage of the pipeline and the occurrence of fuel injection.

There is another possibility. That is, whether the oil in the oil inlet is piled up. Because in many cases, it is necessary to know that the fuel supply pipe of the suction truck vacuum pump is always a relatively thin pipe. Therefore, if oil accumulates in this pipeline for a long time and cannot be circulated, then it will form a very serious degree of clogging at this time. At this time, it is necessary to fully clean and adjust the inlet pipe, and the inlet pipe is relatively fragile. Therefore, during the cleaning and adjustment process, there must be no wear and damage, because if there is any damage, then the inner wall of the oil flow port will see liquid penetration. In this case, the entire suction truck vacuum pump will become obsolete. Therefore, it is only due to these two reasons that the suction port of the suction truck vacuum pump is very serious.


Terex Flange And Bearing

Terex Flange is for strength, for guiding, or for attachment to another object .Terex bearing is a machine element that constrains relative motion to only the desired motion, and reduces friction between moving parts.Various parts,Terex 3307 clevis assambly09264925;Terex 3307 flange output-END09016370;Terex 3307 flange-input END09264802;Terex bearing09441863;Terex spherical bearing09253494;Terex 3307A-frame joint bearing and so on.

Terex Flange,Terex Bearing,Terex Split Flange,Terex Ball Bearing

Chengdu Svoda Machinery Equipment Co.,Ltd , https://www.svdequips.com