A few days ago, it was learned that in addition to national and municipal subsidies, Pudong and Jiading’s privately-purchased new energy vehicle subsidies are open-ended, while the current quota of 300 vehicles in Minhang District has been used up.
The internal structural design is vane, Vane Damper is more suitable for soft close. ABD vane dampers are used to dampen drives, control speed, and many other applications. The damping direction of the vane dampers with continuous rotation can be clockwise, counter clockwise, or in both directions. Vane dampers are widely used in automobile interior decoration, household electric appliances, furniture and bathroom products, etc. Our dampers can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.
NOTE:
1. Please contact the corresponding product engineer for specific torque products.
2.The Standard of completion closing:the angle is 90° between Shaft A and Shaft B.
3.It is closing position to assemble the shaft into the housing.
4. Max. cycle rate: 3 cycles/min(Clockwise110 °, 110 ° anti-clockwise for 1 cycle)
5.Operating temperature:0~40℃
6.Storage temperature:-10~60℃
Soft closing time test: Measure the closing time from angle 70 to 0.
Rated Torque (T).
Test Temperature: 23±2℃.
Durability test:
Test Method: From the closing position to opening position, push back to 70°, soft close from 70° to 0°.
Rated Torque (T).
Operation Angle: 0°~110°.
Test Temperature: 23±2℃.
Durability test cycle: 50,000 cycles. The result of product test )>2s.
Vane Damper Vane Damper,High Temperature Dampers,Toilet Seat Vane Damper,Soft Down Damper,Storage Boxes Vane Damper Shenzhen ABD Equipment Co., Ltd. , http://www.abddamper.com
According to the reporter's understanding, the municipal government has clearly stated that the regional parks will accelerate the promotion of new energy vehicles in key areas such as the International Automobile City, Lingang New City, Pilot Free Trade Zone, International Tourism Resort, Zhangjiang Hi-Tech Park and Zizhu Science Park. The promotion plan mainly includes Jiading District, Pudong New Area and Minhang District. The municipal government requires these three districts to take the lead in formulating regional new energy vehicle promotion and application implementation plans. However, unlike national and municipal subsidies that directly offset the price of the car, regional subsidies need to be paid separately after purchase.
The staff of the Pudong New Area Economic and Information Committee told reporters yesterday that the subsidy target is an individual who owns a household registration in Pudong New Area or who is currently working in a legal person organization in the jurisdiction of Pudong New Area and has paid social security for more than one year. The registered place and the tax accountant are engaged in environmental sanitation in Pudong New Area. Enterprises in the logistics and rental industries. For individuals or enterprises that meet the requirements of subsidies and models, a one-time subsidy of 20,000 yuan per vehicle for new energy vehicles. The staff member stressed that as long as the conditions are met, the quota is not limited and will be valid until June 30 next year.
According to the staff of the Jiading District Economic and Information Committee, the subsidy targets individuals who live or work in Jiading. On the basis of the state and municipal subsidy policies, the district finances will grant a total of 15,000 yuan in electricity subsidies for 2 years. "There was a legend that the quota in Jiading District had been used up and it was not accurate." The staff said, "The number of support we do not cap." However, the Jiading District subsidy policy is only valid until December 31 this year. Individuals who are subsidized must provide vehicle driving information and vehicle status information to the electric vehicle demonstration area. The real-time data is used for basic research such as electric vehicle infrastructure layout and user behavior analysis.
The Minhang District Economic and Information Committee clearly stated that the subsidy policy for new energy vehicles in the district was originally implemented until the end of next year, but the total number of subsidized vehicles was 300, and these quotas have all been used up. In accordance with the original policy, individuals who have a Minhang District household registration or work in a company affiliated to Minhang District and have paid social security for more than 2 years, and a recognized faculty and staff of Minhang District, purchase new energy vehicles, each subsidy of 20,000 yuan. Minhang District Economic and Information Committee has publicized the 300 vehicles according to the time of purchase of invoices, and there is no updated subsidy policy in the near future.
In light of national requirements and the actual development of Shanghai's new energy vehicles, Shanghai has clearly achieved the goal of promoting the application of 13,000 new energy vehicles by 2015. The specific annual promotion target is to promote about 4,000 vehicles in 2013-2014 and about 9,000 vehicles in 2015. According to the model, it is divided into 9,500 new energy passenger cars, 1,400 passenger cars and 2,100 special vehicles. Promote the application of 4,700 new energy vehicles in public services such as public transport, official services, sanitation and logistics. In terms of charging facilities, about 1,800 AC and DC charging piles were built in 2013-2014, and about 4,200 in 2015.
In addition, the reporter learned from the 4S shop, taking the current hot-selling Roewe 550Plug-in plug-in hybrid car as an example, the production capacity is gradually increasing, as long as two or three weeks can be picked up; if the material is complete after picking up the car, within a week You can get a free special license.
When the axis of rotation is moving, the blades that are connected to the axis of rotation rotate at the same time. The silicone oil in the oil chamber is squeezed between the blade andthe body to the back of the blade. The resistance formed by the pressure of the silicone oil to the area of the blade is the damping torque of the rotating shaft and the blade. The torque generated during rotation is determined by the oil viscosity, the pressure area of the blade and the clearance between the blade and the body.
