iron melting furnace usually can smelt to 1550C for melting and pouring, a stable performance furnace is quite key in your furnace efficiency. Rongke furnace specialized in design and manufacturing medium frequency Induction Furnace since 2013, now we have over 300 sets of smelting system running around the world and yearly revenue over 100 million CNY, every year our sales are expanding at least 1.5 times over last year and factory area too is enlarging every two years. now the factory is covering over 15000 sqm. Among the 110 employees we have 20 R&D engineers. Aluminum melting furnace FOSHAN RONGKE INDUSTRIAL ELECTRIC FURNACE CO.,LTD , https://www.rongke-industrial.com
In order to reduce the engine failure caused by improper design of the Ito Power Generating Set, the design of the unit must be designed in accordance with the conditions and precautions of the Ito Generator for the radiator. Radiator usage conditions and precautions are as follows:
First, the use of radiator conditions
1, open use,
(1) The temperature rise of the radiator core group inlet air temperature and ambient temperature ≤ 3 °C;
(2) Inlet and exhaust air area ≥ 120% of radiator ventilation area
2, when using the sound box:
(1) The temperature rise of the radiator core group inlet air temperature and ambient temperature ≤ 10 °C;
(2) The inlet and outlet area of ​​the box is ≥ 110% of the radiator ventilation area;
(3) The minimum wind speed of the air inlet of the box is ≥ 4m/s;
(4) The exhaust resistance of the box is ≤125Pa.
Ito Power Generator Cooling System
Second, the radiator when using the precautions:
1. General precautions when using in open and mute boxes:
(1) When the engine fan and radiator are installed, the fan blade should enter the thickness of 1/2 of the radiator hood to ensure the blowing efficiency;
(2) Anti-freezing and anti-embroidering fluid must be used inside the radiator to prevent the rust inside the engine and the radiator from blocking the cooling core and affecting the cooling efficiency.
(3) Hot air recirculation is not allowed;
2. More attention should be paid to the use of the sound box:
(1) In order to prevent excessive temperature rise in the tank, it is recommended to insulate the exhaust pipe installed in the unit plant with heat, but it is not allowed to perform heat insulation treatment on the exhaust manifold and the supercharger shell;
(2) It should be avoided to install at the front of the outlet of the water tank, keep the air flow passages before and after the cooling core smooth, and reduce the wind resistance as much as possible.