Al. Tap-off Clamp (bolted type) 120/120

Model No.: 120/120
Application: Machinery
Finish: Hot Galvanizing
Quantity: 25
Trademark: OEIpower
Shipping Package: Cartons, Pallets, Wooden Cases
Specification: IEC, IEEE
Origin: China, Nanyang
HS Code: 7318150000
Bolts and nuts used for transmission and distribution lines. Below is a detailed test report on the D Bracket:
Product D Bracket
Test Items Test Content Test Result
Sample 1 Sample 2 Sample 3 Sample 4 Sample 5 Remarks
Visual Inspection Crack √ √ √ √ √ 1) Passed Mark "√"
2) Not Passed Mark "×"
Test Conclusion:
Stoma Trachoma √ √ √ √ √
Fins √ √ √ √ √
Burr √ √ √ √ √
Galvanizing Thickness μm √ √ √ √ √ 1) Passed Mark "√"
2) Not Passed Mark "×":
Test Conclusion:
Mechanical Characteristics Mechanical Load √ √ √ √ √ 1) Passed Mark "√"
2) Not Passed Mark "×"
Test Conclusion:
Inspector Date: 02. March, 2011                Approved:
TECHNICAL SPECIFICATION 1. SCOPE This specification covers the design and construction of Tension Clamps to be used for the termination of aluminum conductors at terminal poles and section poles. The clamps are suitable for use in tropical zones with a maximum ambient temperature of approximately 40°C and a mean annual temperature of about 28°C, along with high humidity and heavy rainfall. 2. STANDARD This specification references and complies with the following standards: - BS 3288:1973 – Insulator and Conductor Fittings for Overhead Power Lines - BS 729 – Hot Dip Galvanized 3. ELECTRICAL SYSTEM The clamps are designed for use on a 3-phase, 3-wire, 33/22/11/6.6 kV, 50 Hz, primary distribution system with the star-point of the source-end transformer earthed through an Earthing Resistor. 4. DESIGN AND CONSTRUCTION The clamps are manufactured from materials that do not cause chemical corrosion when in constant contact with aluminum conductors. They have a tensile strength that is not less than the breaking strength of the conductors they connect. The design ensures no unnecessary strain or abrasion on conductor surfaces. 5. SIZE OF CLAMPS The clamps are designed to accommodate the following sizes of aluminum conductors: a. 50 mm² Aluminum Conductor b. 100–150 mm² Aluminum Conductor 6. MARKINGS Tension clamps will be indelibly marked according to customer requirements. 7. INSPECTION AND TESTS For evaluation purposes, we will supply the following items: a. A sample of the tension clamp complete with all accessories. b. A copy of the test report conducted in accordance with BS 3288 and BS 729. Material Grade: 300W steel to SANS 143 Finish: Hot dip galvanized With cut threads (cut before galvanizing) Supplied complete with one hex nut and one round flat washer Thread pitch: 2.0 (before galvanizing) Washer outside diameter: 29.2–30.0 mm Bolt hole: 18.0–18.5 mm Thickness: 2.4–3.6 mm Materials Specification: SANS 1431 Corrosion Specification: ISO 1461
DIMENSIONS
A 26.17mm - 27.70mm
B 23.16mm - 24.00mm
C 9.55mm - 10.45mm
D 15.30mm - 16.70mm
E 350mm
F 175mm

Crusher Equipment

Portable Stone Crusher,Portable Jaw Crusher,Mobile Crushing And Screening,Powerful Centralized Granulating Crusher

RECTO MACHINERY CO., LTD RICO (NINGBO) IMP & EXP CO., LTD , https://www.recto-rico.com

August 04, 2025