Bulk Cement Truck, also known as powder material carrier, by a special purpose vehicle chassis, bulk cement vehicle tanks, tracheal road system, automatic discharging device and other parts. Suitable for fly ash, cement, lime powder, mineral powder and granular base grain diameter is not more than 0.1 mm powder dry bulk transport of materials. Mainly used for cement, cement warehouse and large construction sites, can save a lot of packaging materials and loading and unloading work.
CLW GROUP TRUCK Bulk cement vehicle description
Bulk cement truck, also known as powder material carrier, by a special purpose vehicle chassis, bulk cement vehicle tanks, tracheal road system, automatic discharging device and other parts. Suitable for fly ash, cement, lime powder, mineral powder and granular base grain diameter is not more than 0.1 mm powder dry bulk transport of materials. Mainly used for cement, cement warehouse and large construction sites, can save a lot of packaging materials and loading and unloading work.
CLW GROUP TRUCK Bulk cement transportation Semi-Trailer
Bulk cement truck chassis
Can choose dongfeng chassis, chassis, fukuda chassis of liberation and steyr heavy vehicle chassis, jianghuai chassis.
Bulk cement tank car
Bulk cement tank car is mainly composed of cylinder, the top of tank for inlet, fluidized bed, discharge tube assembly, of intake pipe and other accessories.
At the top of tank is equipped with two or three mouth to feed
CLW GROUP TRUCK Bulk cement truck tracheal road system
Bulk cement truck front, air chamber after each set an air inlet pipe, can be realized respectively by ball valve at the same time open and separate control.
CLW GROUP TRUCK Bulk cement truck Working principle of the system are as follows: motivation from the car gearbox, through the transmission device drives the air compressor, the compressed air in the gas pipeline interior control, make the tank of powder material produces fluidization phenomenon. When the pressure is 0.196 Mpa, open the discharge butterfly valve, discharge.
CLW GROUP TRUCK Bulk cement truck Use manual bulk cement truck
1, don't overspeed driving bulk cement truck, overpressure, running speed and overpressure can severely damage the air compressor. This machine is the highest speed main technical parameters see table, work pressure is 0.2 MPa.
2, don't start or stop the air compressor, fast and slow growth or slow down, otherwise, the impact force will damage the compressor.
3, don't change the rotation direction of air compressor, otherwise, the oil pump is not oil can seriously damage the machine.
4, do not stop in front of the reduced pressure air compressor, otherwise, the powder material may go back into the cylinder, air compressor is serious damage.
5, need to check the oil before starting the standard. Oil oil level shall not be lower than the lower limit; Need to check whether the oil pump oil supply, without oil, it is necessary to stop the machine immediately to check, otherwise, oil shortage will seriously damage the air compressor.
6, to timely replacement lubricating oil. Phone use after 30 hours, discharge of oil in the crankcase, clean inside the crankcase and oil screen, and then an oil change. According to the above oil change once a year later.
7, to check, clean oil screen. Normal quarterly inspection, cleaning time, if the machine utilization rate is high, should check and clean once a month.
8, this machine is used for CD40 lubricating oil diesel oil. Ban on different type of lubricating oil to mix, or lubricating oil deterioration will affect the lubrication effect.
9, each working 30 hours to maintain, clean air filter. While rotating filter pressure is less than 0.6 MPa compressed air blowing from inside to outside. Maintenance after five times, please replace the new filter. It is forbidden to oil or water to clean the filter element.
Bulk Cement Truck|Powder material truck Bulk Cement Truck,Bulk Powder Truck,Cement Tanker,Powder material truck CLW GROUP TRUCK , http://www.clwgrouptruck.net
In order to implement the spirit of the Second Provincial Industrial Development Conference and the deployment of the province’s defense science and technology and equipment industry work conference, the committee and the Guiyang Municipal People's Government plan to co-host the system at the Guiyang International Convention and Exhibition Center on May 15-17, 2015. meeting. The theme of this year's Expo is “Leading ahead in manufacturing, promoting green transformation†as the theme, adhering to the principles of “government guidance, market operation, and economic developmentâ€, actively building a cooperation and exchange platform for equipment manufacturing, helping equipment companies to promote technological products and developing Market, establish brand, seek development.
At the mobilization coordination meeting, the organizing committee office informed about the preparations for the event. This year's CES has five special exhibition areas, including energy-saving and new energy vehicles, construction machinery (agricultural machinery, special vehicles), CNC machine tools and metal processing, military-civilian integration (aviation, aerospace), advanced manufacturing equipment and technology, with a planned area of ​​20,000 yuan. Square meters. Up to now, more than 10 cities including Shenzhen, Shenyang, Harbin, Qingdao, and Chengdu have intention to participate in the exhibition. It is expected that there will be more than 200 exhibitors and more than 15,000 professional visitors.
Delegates took the floor to make preparations for the preparation of the Expo. They actively provided suggestions and suggestions and offered valuable opinions on investment invitations, forum activities, and user organizations. Everyone expressed that they will work together, unite and work together and go all out to establish the Guizhou Manufacturing Expo to be effective, influential, and scale-up, and establish communication and cooperation platforms and windows for the majority of equipment manufacturers.
The Economic and Credit Commission of Shandong Province emphasized that the first is to highlight the highlights, especially in connection with the promotion and application of new energy vehicles in our province, to effectively organize energy conservation and new energy vehicles, organize promotion, promote products, and vigorously promote new energy vehicles in our province. The second is to ensure the safety of the activities, to do a good job in the construction safety during the exhibition and dismantling, on-site order maintenance and security during the exhibition, etc. Third, the organizing committee must seriously study the opinions put forward by the participants. It is suggested that the work program be further revised and improved, that all work be carried out, and that propaganda efforts be strengthened to ensure successful completion of the current session of the Expo.
Bulk Cement Truck|Powder material truck
On the afternoon of April 17, the Guizhou Economic and Information Technology Commission organized the Mobilization Coordination Meeting for the 2015 China (Guizhou) International Equipment Manufacturing Industry Fair (hereinafter referred to as the “City Expoâ€). The related departments of the city's industry management departments, key enterprises and committees More than 40 people in charge of the room attended the meeting.