Larry Shapiro photo Larry Shapiro photo Larry Shapiro photo Ethylene Decomposition Furnace Anchor There are many types of anchors, and high-holding anchors are commonly used on drilling platforms, as shown in Figure 1. The main feature of this anchor is that its gripping force can only be guaranteed when the pulling force is in the horizontal direction. If the pulling force has a vertical component, the gripping force is reduced, and the anchor claw will be pulled out of the ground. Experiments show that the grip force starts to decrease when the anchor handle is turned up by 6°, and the grip force decreases significantly when the anchor handle is turned up by 12°. Therefore, when mooring, the lower end of the anchor chain must be tangent to the seabed, otherwise there is a danger of running the anchor. Lifting the anchor is to use this feature, pull the anchor chain upward to lift the anchor handle, the anchor loses its grip, and finally breaks out of the ground. Ethylene Decomposition Furnace Anchor,Refractory Casting Anchors,Anchors For Pre Heater,304 Stainless Steel Refractory Anchor Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com
A few more images from the Box Alarm fire in Winnetka on September 2nd, 2020 (more). These photos capture the intensity of the incident and the efforts of first responders.
These additional photos provide a closer look at the damage caused by the fire and the emergency vehicles that responded to the scene. The attic fire was particularly intense, with flames visible through the roof. Firefighters worked tirelessly to contain the blaze and prevent it from spreading further.
The Spartan Gladiator classic and the E-ONE Typhoon fire engine are two of the many units that arrived on the scene. Their presence highlights the coordinated effort between local fire departments and emergency services.
If you'd like to see more, you can view the full gallery or take a slideshow tour of these images.