Model NO.: R2M-500-II
Color: According to Customer′s Request
Rate of Production: 3-12 PCS/Min
Machining Diameter Tolerance: +/-0.5mm
Air Pipe Diameter: 10mm
Time of Change Mould: Less Than 10 Minutes (One Worker Operate)
Feeding Plate Location Set: Yes
Working Temperature: -5 & +65 Degree Centigrade
Delivery Time: 25 Working Days After Advance Payment
Trademark: FJC
Transport Package: Wooden Case with Soft Film Layer
Specification: 500
Origin: China
HS Code: 8462219000
Â
Brief Introduction:
Hydraulic Automatic Two Rolling Plate Rounding Machine, the upper rolling is steel shaft, the under rolling is steel mandrel with stretchy rubber, adjust the distance between two rollings, when we start the machine, the rubber shaft will move down to the mandrel by two hydrocylinders. At the same time, due to the elastic distortion of rubber shaft, the steel plate will happen plastic distortion too.
Forming Principle:
Machining Results:
Advantage:
* Automatic taking out the cylindrical product
* Easy operation(manumotive/automatic/emergency-stop and etc), only need one worker.
* Once shaping
* Good roundness and etc.
The mandrel can be designed according to your requirements. Main Technical Data:
| Machining Material |
Carbon/Stainless Steel |
Diameter Tolerance |
±0.5mm |
| Machining Diameter |
¢100mm~¢750mm |
Seam Width |
5mm~10mm |
| Machining Effective Length |
200mm~500mm |
Axial Malposition Tolerance |
±0.5mm |
| Plate Thickness Range |
0.8mm~4mm |
 |
 |
Another Series:
Â
If you are interested in our machine, please contact us for more information, welcome to contact us at any time, we will reply you as soon as possible!Â
Â